content loaded

RIDGID 61487 K3800 230V W/C45 F/EUR W/PRFD

MFR Part #: 61487
SKU #: 1101337
Brand: RIDGID®
UPC: 0095691614872
RIDGID® 61487 K-3800 Drum Machine Kit With C-45 Cable, 3/4 to 4 in Drain Line, 1/10 hp, 230 VAC
Model T-202 Funnel Auger, Model T-142 Knife Blade Cutter, Model T-107 Spade Cutter, Model A-12 Pin Key, Heady Duty AUTOFEED® System, RIDGID® Leather Drain Cleaning Gloves and Operator's Manual
For cleaning through 3/4 in to 1-1/2 in sink traps

RIDGID® Drum Machine Kit, 3/4 to 4 in Drain, 1/10 hp, 230 VAC, 75 ft of 1/2 in Cable Drum, 240 rpm

The RIDGID® K-3800 drain cleaning machine will clean drain lines up to 4 in diameter and 100 ft in length. Drum provided with the machine holds up to 100 feet of 3/8 in cable or 90 ft of 1/2 in cable. An optional sink drum holds 50 ft of 5/16 in cable. Both drums include an inner drum to guard against cable flip over. Designed to clean sink lines, floor drains and roof vents. The drum is driven by a 1/10 hp universal series motor that has a grounded electrical system. An integral ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides on/off control of the motor. When the cable hits a blockage, the motor gears down automatically to provide more power and greater operator control. The cable is manually fed in and out of the drain. An optional auto feed is available that will advance or retract the cable. Drum tilt adjusts to provide proper cable feed angle. The cable has a quick change coupling system for connecting tools. The drum separates from the motor frame for two-hand transport.

Product Details

RIDGID® Drum Machine Kit, 3/4 to 4 in Drain, 1/10 hp, 230 VAC, 75 ft of 1/2 in Cable Drum, 240 rpm

The RIDGID® K-3800 drain cleaning machine will clean drain lines up to 4 in diameter and 100 ft in length. Drum provided with the machine holds up to 100 feet of 3/8 in cable or 90 ft of 1/2 in cable. An optional sink drum holds 50 ft of 5/16 in cable. Both drums include an inner drum to guard against cable flip over. Designed to clean sink lines, floor drains and roof vents. The drum is driven by a 1/10 hp universal series motor that has a grounded electrical system. An integral ground Fault Interrupter (GFCI) is built into the line cord and a pneumatic foot actuator provides on/off control of the motor. When the cable hits a blockage, the motor gears down automatically to provide more power and greater operator control. The cable is manually fed in and out of the drain. An optional auto feed is available that will advance or retract the cable. Drum tilt adjusts to provide proper cable feed angle. The cable has a quick change coupling system for connecting tools. The drum separates from the motor frame for two-hand transport.

Attributes

Country Of Origin: US
Drain Line Capacity: 3/4 to 4 in
Drum Capacity: 75 ft of 1/2 in Cable
Horsepower: 1/10 hp
Speed: 240 rpm
Tool/Kit: Kit
Voltage Rating: 230 VAC

Features

  • A powerful, easy to transport, versatile machine for cleaning indoor drains and requires minimal set up to clean sink lines, floor drains and roof vents
  • Rugged, corrosion resistant molded cable drum won't dent or rust, the drum tilt adjusts for proper cable feed angle, inner-drum guards against cable flip over inside the drum
  • Cable drum's quick-release and built-in hand-holds allow easy cable change and transport
  • Powerful 175 W universal motor spins cable at 240 rpm when cable hits blockage, motor gears down automatically to deliver more power and enhance operator control
  • Tools connect to cable in seconds

Resources

Warranty Information