content loaded
AO SMITH 100362592 Image 1

AO SMITH 100362592 DELC-30 4KW 240V 1/3-PHASE ELECTRIC WATER HEATER

MFR Part #: 100362592
SKU #: 1291301
Brand: A.O. Smith®
UPC: 400051885975
AO Smith® 100362592 Dura-Power™ 27 USG/103 L Lowboy Commercial Electric Water Heater

The Dura-Power™ DEN/DENC/DEJC (standard upright) and DEL/DELC (lowboy) series are available with tank capacities from 6 through 119 gallons. They can be installed for non-simultaneous and single-element operation (maximum input up to 6 kW ) or for simultaneous dual-element operation (maximum input up to 12 kW). They are designed for use as recovery heaters for light-duty hot water supply service.

Product Details

The Dura-Power™ DEN/DENC/DEJC (standard upright) and DEL/DELC (lowboy) series are available with tank capacities from 6 through 119 gallons. They can be installed for non-simultaneous and single-element operation (maximum input up to 6 kW ) or for simultaneous dual-element operation (maximum input up to 12 kW). They are designed for use as recovery heaters for light-duty hot water supply service.

Attributes

Phase1/3
Capacity30 gal
CollectionDura-Power™
Commercial/ResidentialCommercial
Series100
Voltage240 V
Water Heater TypeElectric
Wattage2000 W

Features

  • Thirteen sizes; 6 thru 119 gallon capacity. Tank interior is coated with glass specially designed by A. O. Smith for water heater use.
  • Zinc plated copper sheaths for longer life. Medium watt density means lower surface temperature to minimize scale build-up and more surface to heat water. Element sizes from 1. 5 to 6 KW. Maximum input 12 KW (see chart).
  • 120, 277 single phase and 208, 240 and 480V unbalanced three-phase delta; easily converted to single-phase at terminal block (except 208V with 5500 watt elements). Single element heaters, single-phase only.
  • Factory-installed. Just bring the service to heater and connect to block. Terminal block not supplied on 120V & 277 volt models (no junction box on DEL 6-20).
  • Temperature control (adjustable through a range of 110° to 170°F on single element and 120° to 181°F on dual element) and manual reset high temperature cutoff per element.
  • Has bonderized undercoat with baked enamel finish.