AO SMITH 100133243 DEN-120 119USG 5KW 240V 3PH WATER HEATER
Product Details
Attributes
Features
Resources
The Dura-Power DEN/DENC/DEJC (standard upright) and DEL/DELC (lowboy) series are available with tank capacities from 6 through 119 gallons. They can be installed for non-simultaneous and single-element operation (maximum input up to 6 kW ) or for simultaneous dual-element operation (maximum input up to 12 kW). They are designed for use as recovery heaters for light-duty hot water supply service.
- Thirteen sizes; 6 thru 119 gallon capacity.
- Tank interior is coated with glass specially designed by A. O. Smith for water heater use.
- Zinc plated copper sheaths for longer life.
- Medium watt density means lower surface temperature to minimize scale build-up and more surface to heat water.
- Element sizes from 1.5 to 6 KW.
- Maximum input 12 KW (see chart).
- 120, 277 single phase and 208, 240 and 480V unbalanced three-phase delta; easily converted to single-phase at terminal block (except 208V with 5500 watt elements).
- Single element heaters, single-phase only.
- Factory-installed.
- Just bring the service to heater and connect to block.
- Terminal block not supplied on 120V & 277 volt models.
- No junction box on DEL6-177
- Temperature control (adjustable through a range of 110° to 170°F on single element and 120° to 181°F on dual element) and manual reset high temperature cutoff per element
- Has bonderized undercoat with baked enamel finish
Product Details
The Dura-Power DEN/DENC/DEJC (standard upright) and DEL/DELC (lowboy) series are available with tank capacities from 6 through 119 gallons. They can be installed for non-simultaneous and single-element operation (maximum input up to 6 kW ) or for simultaneous dual-element operation (maximum input up to 12 kW). They are designed for use as recovery heaters for light-duty hot water supply service.
Attributes
Features
- Thirteen sizes; 6 thru 119 gallon capacity.
- Tank interior is coated with glass specially designed by A. O. Smith for water heater use.
- Zinc plated copper sheaths for longer life.
- Medium watt density means lower surface temperature to minimize scale build-up and more surface to heat water.
- Element sizes from 1.5 to 6 KW.
- Maximum input 12 KW (see chart).
- 120, 277 single phase and 208, 240 and 480V unbalanced three-phase delta; easily converted to single-phase at terminal block (except 208V with 5500 watt elements).
- Single element heaters, single-phase only.
- Factory-installed.
- Just bring the service to heater and connect to block.
- Terminal block not supplied on 120V & 277 volt models.
- No junction box on DEL6-177
- Temperature control (adjustable through a range of 110° to 170°F on single element and 120° to 181°F on dual element) and manual reset high temperature cutoff per element
- Has bonderized undercoat with baked enamel finish