EATON 10250T45113 OILTIGHT JOYSTICK OPERATOR
Product Details
Attributes
Features
Resources
EATON Joystick Operator, Heavy Duty Oil/Watertight, Series: 10250T, 30.5 mm Size, 4 Positions, NEMA 3/3R/4/4X/12/13 Enclosure, 1 to 150 deg F
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
- The device mounts in the standard 30.5 mm mounting hole
- Allow sufficient panel space for lever movement
- The maximum travel of the knob operator (full up to full down) is 2.2 in (24 deg) momentary, 2-1/2 in (30 deg) maintained, but ample space for lever operation must be allowed
- These operators are field convertible from momentary to maintained operation or vice versa
- The use of NC contacts is preferred because they provide positive drive contact opening and a direct relationship between lever movement and affected terminal, up movement affects the top terminals
- The panel area required for the four position operator is equivalent to 2 standard pushbutton operators
- The latch holds the lever in the center position
- The trigger latch must be released before lever can moved into any position
- Without overcurrent latch
Product Details
EATON Joystick Operator, Heavy Duty Oil/Watertight, Series: 10250T, 30.5 mm Size, 4 Positions, NEMA 3/3R/4/4X/12/13 Enclosure, 1 to 150 deg F
Eaton's 10250T line of 30.5 mm pushbuttons features a heavy-duty zinc die cast construction. Reliability nibs improve contact reliability even under dry circuit and fine dust conditions. In addition, drainage holes prevent the buildup of liquid inside the operator, which can prevent operation in freezing environments.
Attributes
Features
- The device mounts in the standard 30.5 mm mounting hole
- Allow sufficient panel space for lever movement
- The maximum travel of the knob operator (full up to full down) is 2.2 in (24 deg) momentary, 2-1/2 in (30 deg) maintained, but ample space for lever operation must be allowed
- These operators are field convertible from momentary to maintained operation or vice versa
- The use of NC contacts is preferred because they provide positive drive contact opening and a direct relationship between lever movement and affected terminal, up movement affects the top terminals
- The panel area required for the four position operator is equivalent to 2 standard pushbutton operators
- The latch holds the lever in the center position
- The trigger latch must be released before lever can moved into any position
- Without overcurrent latch