RIDGID 66507 Image 1
RIDGID 66507 Image 2
RIDGID 66507 Image 3
content loaded
RIDGID 66507 Image 1

K60SP SE 100V 50/60HZ JAPAN RIDGID 66507

MFR Part #: 66507
SKU #: 1102190
Brand: RIDGID®
UPC: 095691665072
RIDGID® 66507 Reversible Drain Cleaning Machine, 1-1/4 to 4 in of 5/8 in Cable/2 to 4 in of 7/8 in Cable Drain Line, 1/2 hp, 100 V
Full Lifetime
A-1 Operators Mitt, A-60-12 Rear Guide Hose, T-101 Straight Auger, T-102 Funnel Auger, T-107 Spade Cutter, T-125 Retrieving Auger, T-150-1 Sharktooth Cutter, A-3 Tool Box, A-12 Pin Key, (5) Sections C-10 7/8 in x 15 ft Cable and A-8 Cable Carrier
Institutional, Commercial, Residential and Septic Tank Vacuum Truck Operators
CSA Certified | UL Listed

RIDGID® Drain Cleaning Machine, Reversible, Bare Tool Tool/Kit, 1-1/4 to 4 in of 5/8 in Cable/2 to 4 in of 7/8 in Cable Drain, 1/2 hp, 100 V, 7 A, 600 rpm, 76.6 dB, 18 in L x 9.5 in W x 14 in H

The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 1-1/4 to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks The machine is driven by a 1/2 hp motor that has a grounded electrical system. An integral Ground Fault In - terrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 and 7/8 in sectional cable.

Product Details

RIDGID® Drain Cleaning Machine, Reversible, Bare Tool Tool/Kit, 1-1/4 to 4 in of 5/8 in Cable/2 to 4 in of 7/8 in Cable Drain, 1/2 hp, 100 V, 7 A, 600 rpm, 76.6 dB, 18 in L x 9.5 in W x 14 in H

The RIDGID® K-60SP is a portable Drain Cleaning Machine designed to clean 1-1/4 to 4 in drain lines. Applications include laundry tubs, floor drains, roof vents and stack lines. Rear handle allows for transporting up ladders and cleaning roof-top vent stacks The machine is driven by a 1/2 hp motor that has a grounded electrical system. An integral Ground Fault In - terrupter (GFCI) is built into the line cord. A toggle switch provides FOR/OFF/REVERSE control of the motor. The K-60SP is designed to use sectional-type cable that has a quick change coupling system for disconnecting tools. The cable is manually fed in and out of the drain and rotates at a speed of 600 RPM. The rotation of the cable is controlled by a clutch handle. The cable stops instantly when the clutch handle is released. An adjustment knob allows the K-60SP to use both 5/8 and 7/8 in sectional cable.

Attributes

Amperage Rating: 7 A
Horsepower: 1/2 hp
Speed: 600 rpm
Tool/Kit: Bare Tool
Type: Reversible
Voltage Rating: 100 V

Features

  • Small enough to fit into cramped spaces, yet powerful enough to clear tough blockages
  • Ideal for rooftop vent stacks
  • Rear handle allows for easy transporting up ladders and onto rooftops
  • Remove only two bolts to access jaw set for cleaning or replacement
  • Removal of same bolts provides access to belt drive

Resources

Owners/User Manual
Specification Sheet
Warranty Information